Step 1 - Clean the area thoroughly

Clean the area thoroughly with rubbing alcohol (if surface permits) or soap and water. Dry completely.

Step 2 - Prepare the decal for application

Prepare the decal by firmly rubbing and pressing firmly across the clear transfer tape on a flat surface.

Step 3 - Peel up the decal

Lift the clear transfer tape off the paper backing at a sharp angle. If the decal sticks to the backing, carefully lay the transfer tape back down and repeat Step 2. Peeling slowly helpings release the vinyl. If the decal sticks to the backing, try flipping over the decal and peeling back the paper backing instead.

Step 4 - Lower the sticker onto the surface

Lower the sticker onto the surface with two hands starting from one corner to another. Once applied, firmly rub the decal through the transfer tape with a finger or credit card. Allow a few minutes for the adhesive to cure.

Step 5 - Slowly peel up the transfer tape

Slowly peel the transfer tape back at an angle towards the surface. If the decal lifts, lay the transfer tape back down and repeat Step 4.

If you have any questions, feel free to send us a message!